Electrical Archives - Pagina 4 van 4 - Weld-On

Weld-On® 845™-patroon

Two-Component, high strength, highly viscous, low VOC reactive lijm conveniently packaged in a dual cylinder cartridge for easy dispensing and application to the bonding surfaces. This product can withstand very high pressure and large temperature range (-30°F / -35°C to 140°F / 60°C). It is also impact resistant and can be used in wet conditions. […]

Weld-On® 811™-patroon

Two-component, high strength, low VOC reactive lijm conveniently packaged in a dual cylinder cartridge for easy dispensing and application to the bonding surfaces. Product can withstand very high pressure and is high impact resistant. Great for repairing cracks or leaky buis valves and fittings. It has excellent gap-filling property which is ideal for fabricating fittings […]

Weld-On® 810™ (A & B) Kit

Two-component, high strength, low VOC reactive lijm. Product can withstand very high pressure and is high impact resistant. Great for repairing cracks or leaky buis valves and fittings. It has excellent gap-filling property which is ideal for fabricating fittings and joining saddles to buis. Also good for bonding large diameter PVC and CPVC buis and […]

Weld-On® DUIT™ 411™

hoge viscositeit, normaal hardendting, low VOC cement for all PVC electrical conduit or any non-pressure PVC application with interference fit through 12″ (315 mm) diameter. Can be used without primer if local codes permit. Specified by the world’s largest electric and gas companies.

Weld-On® DUIT™ 427™

Gemiddelde viscositeit, zeer snelhardend, cement met een laag vluchtig gehalte voor alle PVC-elektrische leidingen of drukloze PVC-toepassingen met een nauwe passing door een diameter van 8″ (200 mm). Verbindingen met hoge sterkte kunnen worden gemaakt bij temperaturen van -28°C tot 43°C. Kan zonder primer worden gebruikt indien de lokale voorschriften dit toestaan. Gespecificeerd door de […]

Weld-On® DUIT™ 425™

gemiddelde viscositeit, extremely snelhardendting, low VOC cement for all PVC electrical conduit or any non-pressure PVC application with interference fit through 8″ (200 mm) diameter. Can be used without primer if local codes permit. Specified by the world’s largest electric and gas companies.

Weld-On® DUIT™ 413™

gemiddelde viscositeit, snelhardendting, low VOC cement for all PVC electrical conduit or any non-pressure PVC application with interference fit through 8″ (200 mm) diameter. Can be used without primer if local codes permit. Specified by the world’s largest electric and gas companies.

Weld-On® DUIT™ 400™

lage viscositeit, snelhardendting, low VOC cement for all PVC electrical conduit or any non-pressure PVC application with interference fit through 8″ (200 mm) diameter. Can be used without primer if local codes permit. Specified by the world’s largest electric and gas companies.

Weld-On® C-65™ reiniger

Formule met een laag vluchtige organische stoffen (VOS) voor het verwijderen van olie en vet van PVC, CPVC, ABS en STYREEN buizen en fitting's. Aanbevolen voor gebruik vóór het primeren van buizen en fitting's.