Plumbing | Weld-On lijms, Inc.

Weld-On® PVC & ABS reiniger

Weld-On PVC & ABS reiniger is a general use reiniger for removal of oil and grease from the surfaces of PVC, CPVC, and ABS buis and fittings. ** Not available in all regions

Weld-On® 2810 PVC

Weld-On 2810 PVC is a THF-Free cement with 30% lower solvent emission rate and significantly reduced odorous fumes than the current solvent lijms in the market. The 2810 is a helder, extremely low outgassing, low Viscositeit, snelhardendting PVC cement ideal for push-fitting buiss and interference fittings up to 110mm in diameter. ** Not available […]

Weld-On® S3 PVC

Weld-On S3 PVC is a gemiddelde viscositeit, snelhardendting, PVC cement for all classes and Schedules of buis with interference fit through 160mm in diameter.  Schedule 80 through 110mm diameter. S3 is a high-strength formula for irrigation, DWV, agricultural, horticultural and greenhouse applications.  Ideal for pressurized buis with the ability to fill gaps up to 0.8mm. […]

Weld-On® 600D™ Drainage lijm

Weld-On® 600D™ is a helder, hoge viscositeit, snelhardendting special purpose contact lijm. Applicable to plastic drainage systems: triple wall HDPE, polypropylene, PVC, vinyl and styrene. For non-pressure applications only. Meets SCAQMD Rule 1168 (all other lijms).

Weld-On® buis Repair Wrap

Silicone self-fusing buis repair wrap for plastic buis, metal buis, hoses and more Waterproof tape stops leaks in seconds Bonds to itself in less than one minute Applies to wet, dirty or oily surfaces UV resistant and residue-free 500F heat resistant Up to 450 PST for 1/8” pinhole leak and up to 100 PSI for […]

P-68™ UV-GLOW™ primer

Weld-On® P-68 UV Glow primer is a code compliant helder, ultra-low VOC, fast acting primer that rapidly softens and dissolves the joining surfaces of PVC and CPVC buis and fitting prior to the application of Oplosmiddellijm. The first helder primer with triple unique attributes: Clean, helder appearance that glows paars under Ultraviolet blacklight. THF-free. […]

Weld-On® FlowGuard Gold® Green

FlowGuard Gold Green is a green, extreem lage uitgassing emission, gemiddelde viscositeit, snelhardendting, CPVC Oplosmiddellijm for CPVC copper tube size buis and fittings with interference fit through 2 inches (63 mm) diameter. ALL WEATHER, ONE STEP CEMENT – formulated to be used without primer if Codes permit. For potable water to 180°F (82°C). […]

Weld-On® P-68 primer

Weld-On® P-68 primer™ is a code compliant, THF-free primer with 30% lower solvent emission rate and significantly reduced odorous fumes than the current products in the market–resulting in an improved workplace environment for buis installers. The P-68 primer is a helder or paars, extreem lage uitgassing, fast acting primer that rapidly softens and dissolves the […]

Weld-On® 700 ECO™

Weld-On® 700 ECO™ is a code compliant, premium THF-free cement with 30% lower solvent emission rate and significantly reduced odorous fumes than the current Oplosmiddellijms in the market – resulting in an improved workplace environment for buis installers. The 700 ECO is a helder, extreem lage uitgassing, lage viscositeit, snelhardendting, high strength PVC […]

Weld-On® 717 ECO™

Weld-On® 717ECO™ is a code compliant, premium THF-free cement with 30% lower solvent emission rate and significantly reduced odorous fumes than the current Oplosmiddellijms in the market – resulting in an improved workplace environment for buis installers. The 717 ECO is a helder or gray, extreem lage uitgassing, hoge viscositeit, normaal hardendting, maximum strength […]
1 2 3 6