Weld-On PVC & ABS Cleaner is a general use cleaner for removal of oil and grease from the surfaces of PVC, CPVC, and ABS pipe and fittings. ** Not available in all regions
Weld-On 2810 PVC is a THF-Free cement with 30% lower solvent emission rate and significantly reduced odorous fumes than the current solvent adhesives in the market. The 2810 is a clear, extremely low outgassing, low viscosity, fast setting PVC cement ideal for push-fitting pipes and interference fittings up to 110mm in diameter. ** Not available […]
Weld-On S3 PVC is a medium bodied, fast setting, PVC cement for all classes and schedules of pipe with interference fit through 160mm in diameter. Schedule 80 through 110mm diameter. S3 is a high-strength formula for irrigation, DWV, agricultural, horticultural and greenhouse applications. Ideal for pressurized pipe with the ability to fill gaps up to 0.8mm. […]
Weld-On® 600D™ is a clear, heavy bodied, fast setting special purpose contact adhesive. Applicable to plastic drainage systems: triple wall HDPE, polypropylene, PVC, vinyl and styrene. For non-pressure applications only. Meets SCAQMD Rule 1168 (all other adhesives).
Silicone self-fusing pipe repair wrap for plastic pipe, metal pipe, hoses and more Waterproof tape stops leaks in seconds Bonds to itself in less than one minute Applies to wet, dirty or oily surfaces UV resistant and residue-free 500F heat resistant Up to 450 PST for 1/8” pinhole leak and up to 100 PSI for […]
Weld-On® P-68 UV Glow Primer is a code compliant clear, ultra-low VOC, fast acting primer that rapidly softens and dissolves the joining surfaces of PVC and CPVC pipe and fitting prior to the application of solvent cement. The first clear primer with triple unique attributes: Clean, clear appearance that glows purple under Ultraviolet blacklight. THF-free. […]
FlowGuard Gold Green is a green, ultra low VOC emission, medium bodied, fast setting, CPVC solvent cement for CPVC copper tube size pipe and fittings with interference fit through 2 inches (63 mm) diameter. ALL WEATHER, ONE STEP CEMENT – formulated to be used without primer if Codes permit. For potable water to 180°F (82°C). […]
Weld-On® P-68 PRIMER™ is a code compliant, THF-free primer with 30% lower solvent emission rate and significantly reduced odorous fumes than the current products in the market–resulting in an improved workplace environment for pipe installers. The P-68 PRIMER is a clear or purple, ultra low VOC, fast acting primer that rapidly softens and dissolves the […]
Weld-On® 700 ECO™ is a code compliant, premium THF-free cement with 30% lower solvent emission rate and significantly reduced odorous fumes than the current solvent cements in the market – resulting in an improved workplace environment for pipe installers. The 700 ECO is a clear, ultra low VOC, regular bodied, fast setting, high strength PVC […]
Weld-On® 717ECO™ is a code compliant, premium THF-free cement with 30% lower solvent emission rate and significantly reduced odorous fumes than the current solvent cements in the market – resulting in an improved workplace environment for pipe installers. The 717 ECO is a clear or gray, ultra low VOC, heavy bodied, medium setting, maximum strength […]
